Spray lubricants are a staple across workshops, factories, garages, and for facilities maintenance. The RS lubricant range makes available various products in spray form, allowing for quick access to hard-to-reach parts. This, in turn, can be key to protecting moving components, minimising friction, and guarding against premature wear.
However, even in cases where the right product for the job is selected, certain mistakes can be made that have implications for equipment performance, component life, and workplace safety.
When maintenance professionals make themselves aware of some of the most common errors, as set out below, they will be better placed to avoid them and achieve more consistent results from their lubrication processes.
- Using The Wrong Type of Spray Lubricant
It is critical not to presume that all spray lubricants are suitable for the same applications. The reality is that different formulations are designed to address different maintenance challenges.
If, for example, a solvent-heavy product is applied to rubber or plastic, this can lead to swelling, cracking, or brittleness. Petroleum-based lubricants, meanwhile, frequently attract dust and are unsuitable for food-safe or clean settings.
To avoid this mistake, identify the material, operating conditions, and lubrication requirements before you settle on a particular product. Checking guidance from both the lubricant manufacturer and the brand behind the equipment or components that need to be lubricated will help you ascertain the spray’s compatibility.
- Over-Spraying or Applying Too Much Lubricant
Putting a higher amount of lubrication on the given surface does not automatically equate to better protection. Indeed, applying excessive lubricant can lead to drips, mess, and slip hazards. Thick lubricant deposits may also attract airborne particles, allowing dirt and debris to accumulate around moving components.
To avoid this mistake, apply lubricant in controlled amounts, following the manufacturer’s recommendations. Aim for an even coating across the specific contact surfaces in need of lubrication, instead of saturating the entire component. It may sometimes be necessary to remove excess product with a clean cloth prior to the given machinery being returned to service.
- Applying Lubricant Over Dirt or Old Residue
It might seem almost too obvious a mistake for any maintenance professional to make. However, there are still too many instances of lubrication being applied to a surface that hasn’t been prepared for this first.
Lubricant being sprayed onto dusty, greasy, or corroded surfaces can trap contaminants, accelerate wear, and create abrasive paste. This can be a particularly common issue on hinges, rollers, chains, and tracks.
To avoid this mistake, clean the components before applying fresh lubricant, using a suitable cleaning product where necessary. If the given surfaces need a clean and dry application area, give them time to dry first. Remove any dirt and old lubricant residues that might have built up over time; the likes of joints and bearings can be particularly susceptible to such accumulation of contaminants.
- Lubricating The Wrong Components
Certain parts should stay dry or only undergo specific treatments. Door tracks, for instance, often collect dirt when greased. Rubber weatherstripping, meanwhile, can degrade when solvent spray is applied to it. Some nylon or plastic parts can become brittle if petroleum products are used on them.
To avoid this mistake, follow the manuals for the machinery that is to be lubricated. It will likely be necessary to clean door tracks instead of oiling them, and to use dry-film or silicone products on rubber and plastics. Sprays should also be kept away from electrical components and sensors, as well as painted surfaces that will be coated later. When in doubt, test on a small inconspicuous area.
- Overlooking Safety, Ventilation, And Flammability Concerns
The flammability of many aerosol lubricants can often be ignored by maintenance teams. The over-spraying of lubricants near pilot lights, heaters, grinding sparks, or confined spaces can create fire risk. In areas that are poorly ventilated, the potential inhalation of propellants or mist will likely be another major concern.
To avoid this mistake, make sure you only ever spray lubricant in well-ventilated spaces, in addition to keeping your distance from ignition sources and wearing appropriate personal protective equipment (PPE, including both gloves and eye protection). Store spray lubricant cans in cool and dry conditions away from heat.
Final Thoughts: Getting Better Outcomes from Spray Lubrication
The effective use of spray lubricant depends on more than simply choosing an aerosol and applying it to moving components. Such factors as product selection, surface preparation, and workplace safety practices will all impact on your results from this process.
By avoiding common mistakes like those outlined above, maintenance teams can put themselves in a strong position to enhance lubrication consistency, reduce unnecessary product, and help extend the lifespan of critical machinery.